Maintenance Menu
There are three menu items in the "Maintenance" menu.
• Restart Printer
• Menu Reset
• Hex Dump
Maintenance Parameters
Menu
Restart Printer
Menu Reset
Hex Dump
Restarting a Printer
The following procedure describes selecting the "Restart Printer" as an example
in the "Maintenance" menu.
A A A A
Press { { { { User Tools/Counter} } } } .
Dial
k Dial
se/
ial
Description
You can restart the printer.
⇒ p.35 "Restarting a Printer"
You can reset the menu settings to the factory defaults except the
optional Network Interface Board settings.
You can set to isolate the source of a print job problem. With this
function "On", all data sent to the printer is printed in hexadeci-
mal character representation.
• On
• Off
Note
❒ Default: Off
ZENS058N
Printer Features Parameters
4
35