After Replacing The Laser Optics Housing Unit - Ricoh G165 Service Manual

Rev. 08/24/2009

After replacing the laser optics housing unit

⇒
Before performing this procedure, please refer to Technical Service Bulletin –
G165/G166/G167/G181/G183/G184 – 026 Laser Optics Housing Replacement.
Do the following step 2 with the front cover of the machine open.
1. Open the front cover and turn on the machine.
2. Input the setting values for the laser optics housing unit.
Printer model: "LSU Adjustment" in the "SP Mode 2" tab
MF model: "LSU Adjustment" in the "Engine Maintenance" menu (MF model).
The settings are on a sheet of paper that comes with the laser optics housing unit.
3. Close the front cover.
4. Execute "Color Registration" in the "SP Mode 2" tab (printer model) or the "Engine
Maintenance" menu (MF model).
5. Adjust the registration settings for each tray and for the front and rear sides of the
paper with the "SP Mode 2" tab (printer model) or the "Engine Maintenance" menu (MF
model) if necessary.
SM
CÓPIA NÃO CONTROLADA
3-11
CÓPIA NÃO CONTROLADA
Laser Optics
G165/G166/G167/G181/G183/G184