Rev. 08/2008
3.6 IMAGE TRANSFER
⇒
3.6.1 IMAGE TRANSFER BELT UNIT
To simplify the procedure, remove the lower fusing entrance guide instead of the fusing unit
during image transfer belt removal.
1.
Remove all the AIO cartridges (
2.
Transfer unit (
Lower Fusing Entrance Guide
3.
Remove the lower fusing entrance guide (1 hook).
4.
Remove the waste toner bottle.
5.
Remove the two screws [A].
SM
CÓPIA NÃO CONTROLADA
AIO Cartridge).
Transfer Unit)
Hook
3-17
CÓPIA NÃO CONTROLADA
Image Transfer
G165/G166/G167/G181/G183/G184