After Replacing The Image Transfer Belt Unit - Ricoh G165 Service Manual

Image Transfer
6. Pull out the image transfer belt unit [B].

After replacing the image transfer belt unit

Do the following step 2 with the front cover of the machine open.
1. Open the front cover and turn on the machine.
2. Execute "Reset Transfer Unit Life Counter" with the "SP Mode 2" tab (printer model) or
the "Engine Maintenance" menu (MF model).
3. Close the front cover.
4. Execute "Trans. Belt Adjust" with the "SP Mode 2" tab (printer model) or the "Engine
Maintenance" menu (MF model).
5. Adjust the registration settings for each tray and for the front and rear sides of the
paper with the "SP Mode 2" tab (printer model) or the "Engine Maintenance" menu (MF
model) if necessary.
G165/G166/G167/G181/G183/G184
CÓPIA NÃO CONTROLADA
3-18
CÓPIA NÃO CONTROLADA
Rev. 08/2008
SM