Ricoh G165 Service Manual page 192

Service Menu (MF Model)
CNG Cycles
Tone Sound
Monitoring
Stop/Clear key
Off-Hook Level
Redial Interval
TX Settings
Redialings
Overseas
Comm Mode
Overseas Comm
Mode Settings
Minimum Time
Length
G165/G166/G167/G181/G183/G184
CÓPIA NÃO CONTROLADA
Number of CNG cycles to be detected
This setting is only effective for FAX/TAD mode.
[1.5 Cycle (Default)/ 2.0 Cycle]
Determines the period when tones from the line
are monitored.
[No Monitoring/ Up To Phase B (Default)/ All TX
Phases]
Pressing the Stop/Clear key can stop the current
receiving operation. Received data is lost.
[Not Functional (Default)/ Functional]
Sets the off-hook detection threshold.
[10V (Default)/ 15V/ 20V/ 25V]
Sets the redial interval when Tx fails.
[5 Min/ 6 Min]
Sets the number of redials when Tx fails.
[2 times/ 3 Times/ 4 Times/ 5 Times]
This sets the machine to ignore a DIS signal sent
from the called station once in a sending
operation.
[Off (Default)/ Ignore DIS Once]
If this setting is set to "On", the machine detects
the CNG signal after the line is connected. If it is
set to "Off", the machine detects the CNG signal
as long as the line is connected.
[100 Ms/ 200 Ms/ 300 Ms/ 400 Ms (Default)]
5-44
CÓPIA NÃO CONTROLADA
SM