Ricoh G165 Service Manual page 131

Laser Synchronizing Detection Error: [K]/[Y]
The laser synchronizing detection signal for LDB [K]/[Y] is not output after the LDB
220
unit has turned on while the polygon motor is rotating normally.
Laser Synchronizing Detection Error: [M]/[C]
The laser synchronizing detection signal for LDB [M]/[C] is not output after the
LDB unit has turned on while the polygon motor is rotating normally.
Disconnected cable from the laser synchronizing detection unit or defective
connection
224
Defective laser synchronizing detector
Defective LDB
Defective EGB
1. Check the connectors.
2. Replace the laser optics unit.
3. Replace the EGB.
LD error
The IPU (EGB) detects a problem at the LD unit.
240
Worn-out LD
Disconnected or broken harness of the LD.
1. Replace the laser optics unit.
SM
CÓPIA NÃO CONTROLADA
4-7
CÓPIA NÃO CONTROLADA
Service Call Conditions
G165/G166/G167/G181/G183/G184