Paper Path - Ricoh G165 Service Manual

ADF

6.9.2 PAPER PATH

After the original set sensor has detected an original and the machine has received a
copying or scanning job, the ADF motor rotates to pick up and feed a sheet of the original
to the feed sensor. If the feed sensor does not detect paper after this sequence, the
machine determines an original jam has occurred.
The ADF motor stops when the feed sensor detects paper, and then starts to rotate again.
After scanning, the ADF motor stops again, and then starts to rotate to feed out the paper.
G165/G166/G167/G181/G183/G184
CÓPIA NÃO CONTROLADA
6-52
CÓPIA NÃO CONTROLADA
SM