Fusing and Exit
6.7.2 DRIVE
Models without Duplex (G165/G166: Printer model, G181: MF model)
The transport/fusing motor [A] drives the hot roller [B], pressure roller [C] (this is an idle
roller) and paper exit roller [D] (via gears). The paper exit sensor [E] detects the trailing
edge of the paper to determine the stop timing for the transport/fusing motor. It also checks
whether a paper jam occurs at the fusing unit or paper exit.
Models with Duplex (G167: Printer model, G183/G184 MF model)
For models with duplex, the transport/fusing motor drives the hot roller (same as the
models without duplex). However, the paper exit roller [A] is controlled by the duplex motor
G165/G166/G167/G181/G183/G184
CÓPIA NÃO CONTROLADA
6-40
CÓPIA NÃO CONTROLADA
SM