Fusing Unit Related Sc Codes; Anti-Humidity Mode - Ricoh G165 Service Manual

Target Temperature for Each Paper Type
Paper Type
Thin
Plain 1
Recycled
Plain and Recycled
Plain 2
Thick 1
Cardstock
Bond
Envelopes

Fusing unit related SC codes

If one of the fusing unit components (such as thermistors, thermostat, fusing lamp etc.) is
defective, the following SC codes may be issued. For details, refer to the SC code list in the
chapter "Troubleshooting."
SC541, 542, 543, 544, and 545
If one of these SC codes is issued, click or press "Fuser SC Reset" with SOM (printer
model) or "Engine Maintenance" (MF model).

Anti-Humidity Mode

To reduce paper curl in high temperature and humidity environments, the fusing unit does
idle rotation before a job, if the customer enables this function in the user mode.
Mode 1: No fusing idling, transfer roller voltage is increased
Mode 2: Fusing unit rotates for 30 seconds before a job, transfer roller voltage is
increased.
Mode 3: Fusing unit rotates for 60 seconds before a job, transfer roller voltage is
increased.
SM
CÓPIA NÃO CONTROLADA
Target Temperature
175°C
180°C
180°C
180°C
175°C
175°C
175°C
175°C
170°C
6-43
CÓPIA NÃO CONTROLADA
Fusing and Exit
G165/G166/G167/G181/G183/G184