Table of Contents
Advertisement
2.5 System Timer
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
70
Call Forwarding- No Answer Time
3 rings
1-12 rings
Specifies the number of rings before the Call Forwarding No
Answer feature is activated.
If a call is not answered before the programmed number of rings,
the call is redirected to the pre-assigned extension.
Note
• This timer is also used for Intercept Routing. If an incoming
DISA call to the Intercept Routing destination is not answered
before this timer expires, the call will be disconnected.
• 1.11 Transferring Features (F/G)
– Call Forwarding
• 2.5.1 Forwarding Your Calls (Call Forwarding) (U/M)
Extension-to-CO Line Call Duration Time
10 min
1-64 min
Specifies the maximum time allowed for a call with an outside
party.
This time limit can apply to outgoing CO calls only or both
outgoing and incoming CO calls. This is determined by "5. Limited
call duration" setting in Section "2.8 System Option."
Note
• This timer applies to the extension user who is restricted by
"Time Limit of Outside Calls" setting in Section "2.4 Class of
Service (COS)."
None
CO-to-CO Line Call Duration Time
10 min
1-64 min
Specifies the maximum time allowed for a call between two outside
parties (CO-to-CO line call).
If this timer expires during a CO-to-CO line call, it will be
disconnected.
• 1.5 Attended Features (F/G)
– Direct Inward System Access (DISA)
System
Advertisement
Table of Contents
