Table of Contents
Advertisement
11.2 Warning Messages (WXXXX)
Code
W7001
ARS Leading dial must not exceed 10 digits. Truncate it?
Truncate means that the leading 10 digits are saved and the rest are deleted.
W7002
ARS additional dial must not exceed 20 digits. Truncate it?
Truncate means that the leading 20 digits are saved and the rest are deleted.
W8001
PBX code must not exceed 3 digits. Truncate it?
Truncate means that the leading 3 digits are saved and the rest are deleted.
W8002
TIE Leading dial must not exceed 3 digits. Truncate it?
Truncate means that the leading 3 digits are saved and the rest are deleted.
W8003
TIE additional dial must not exceed 20 digits. Truncate it?
Truncate means that the leading 20 digits are saved and the rest are deleted.
W9001
DDI / DID dial must not exceed 16 digits. Truncate it?
Truncate means that the leading 16 digits are saved and the rest are deleted.
W9002
DDI / DID name must not exceed 10 characters. Truncate it?
Truncate means that the leading 10 characters are saved and the rest are deleted.
W9003
Modem command must not exceed 80 characters. Truncate it?
Truncate means that the leading 80 characters are saved and the rest are deleted.
W9004
Modem messages must not exceed 80 characters. Truncate it?
Truncate means that the leading 80 characters are saved and the rest are deleted.
W9005
Base dial number must not exceed 15 digits. Truncate it?
Truncate means that the leading 15 digits are saved and the rest are deleted.
282
Message
Description
Programming Error Messages
Advertisement
Table of Contents
