Table of Contents
Advertisement
Parameter
Default
Value Range
Description/Function
Reference
Maintenance
Extension Card (1-24)
None
None, XXX : YYY [XXX : Card No. (101-314), YYY : Card Type]
Specifies the extension card number and its type, which will be
used in case of Power Failure Transfer.
Notes
• DPTs and some APTs cannot be used during a power failure.
• Auxiliary connections between the Trunk card and
Extension card should be made as per the System
Programming so that conversation is maintained when
power is down or TSW is recovering.
• 1.4 Fault Recovery / Diagnostics (F/G)
– Power Failure Transfer
• 2.9.1 Auxiliary Connection for Power Failure Transfer (I/M)
• 1.2 Slot Assignment (P/G)
10.5 Power Failure Transfer
259
Advertisement
Table of Contents
