Panasonic KX-TD500CE Programming Manual page 244

9.2 Number Transformation
Entry No.1 : 123456 (00)
Entry No.2 : 123456 (01)
Entry No.3 : 123456 (02)
Entry No.99 : 123456 (98)
Entry No.100 : 123456 (99)
Notes
• If more than 15 digits are entered in "[Base Number] Dial" field, the following warning
message will be displayed:
"W9005 : Base dial number must not exceed 15 digits. Truncate it?"
If you press "OK," the exceeded digits will be truncated automatically.
• If the total digits of "Base Number" and "Number of Digits" are over 16, the following
error message will be displayed:
"E9010: Number of DDI dial must be equal to or less than 16 digits."
Then the operation will be aborted.
• If "Beginning Entry No." exceeds 991, the following error message will be displayed:
"E9011: Beginning Entry No. must be equal to or less than 991."
Then the operation is aborted.
• The new entries will override the old ones, if "DDI / DID / MSN" numbers are already
registered in the specified areas.
• If the number of remaining Entry fields is less than the number specified by "Number of
Registrations" setting, for example, "Number of Registrations" is 20 and "Beginning
Entry No." is 991 (10 of 1000 Entry fields are left), only the first 10 DDI / DID / MSN
numbers are registered.
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
244
•
•
•
•
[Base Number] Dial
Blank
Up to 15 digits consisting of 0-9
Specifies the base number for automatic registration.
Additional numbers are appended to the end of this number.
[Additional Number] Number of Registrations
10 entries
10-100 entries in 10 entries increments
Specifies the number of DDI / DID / MSN entries to be registered
automatically.
DDI / DID