Table of Contents
Advertisement
Error Code
E1025
Specify the extension group number.
The extension group number of VPS port should be always assigned.
E1026
Port number duplicated.
Please assign the port number of TVP uniquely.
E1028
Card type should be changed only in OUS (Out-of-Service) status.
Please make the card OUS (Out-of-service) status before deleting the card.
E1029
While copying properties, more than 16 cards cannot be selected.
Please break the task into two sets.
E1030
Cannot change the Port Attribute when currently assigned as VPS port under "1-
4 VPS (DPT) Port Assignment."
When the port which is assigned to VPS (DPT) port is changed to extension port,
please change the port after deleting the assignment in "1-4 VPS (DPT) Port
Assignment" screen.
E1031
Assign the channel type before making the port INS (In-Service) status.
The port of E1 card cannot be made INS (In-Service) status when the channel type of
the port is not assigned.
E1032
Cannot change the status of the VPS port which is in auto configuration mode.
Please change the status of the VPS port after auto configuration.
E1033
Proper card for this feature is not installed in the system.
In order to use this feature, proper card must be installed in the system.
And card must be assigned under Slot Assignment.
E1034
Both extensions (B1 and B2) of 1st jack connected to VPS must be always
assigned.
Both extensions (B1 and B2) of 1st jack are used for communication between PBX and
VPS.
E1035
Cannot remove VPS port while the status is INS (In-Service).
Please make VPS port OUS (Out-of-Service) status before deleting the port.
E1036
Assign a port number before changing the port status.
The VPS port that does not have a port number cannot have its status changed.
E1037
Cannot change the status of the port.
Cannot change the status of the SLT port because the PT port is activated as a "Parallel
Mode" extension. Please change the PT port status to "XDP Mode" and then press
"Apply."
E1038
You have exceeded the shelf limit of extension ports.
There is a limit of 192 extension ports per shelf when using DLC, DHLC and ESLC
cards. Please de-assign one card and try again.
E1039
You have exceeded the shelf limit of SLT ports.
There is a limit of 160 SLT ports per shelf when using DHLC and ESLC cards. Please
de-assign one card and try again.
Programming Error Messages
Error Message
Description
11.1 Error Messages (EXXXX)
273
Advertisement
Table of Contents
