Table of Contents
Advertisement
2.4 Class of Service (COS)
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
64
Released Link Operation
Disable
1.
Enable
2.
Disable
Used to turn on / off "Released Link Operation" mode of the
extension. When Released Link Operation is enabled, an extension
user will be automatically released from a call (extension, outside)
after transferring it to the destination, if the destination extension is
idle. This feature simplifies the transfer operation by eliminating
the need for going on-hook or pressing the RELEASE button after
transferring the call.
This feature is convenient for extension users, such as Operators,
who handle a large volume of calls.
• 1.3 System Features (F/G)
– Released Link Operation
• 2.4.3 Transferring a Call (U/M)
Automatic Hold
Disable
1.
Enable
2.
Disable
Used to turn on / off "Automatic Hold" feature.
• 1.10 Holding Features (F/G)
– Automatic Hold – All Calls
– Automatic Hold – Trunk
Charge Management
Disable
1.
Enable
2.
Disable
Enables or disables the ability of performing "Charge
Management" feature.
• 1.3 System Features (F/G)
— Charge Fee Reference
• 4.2 Charge Fee Management (Station Programming) (U/M)
System
Advertisement
Table of Contents
