Table of Contents
Advertisement
4.2 Trunk Line
Parameter
Reference
Parameter
Default
Value Range
Description/Function
Reference
138
Incoming Type
• 1.5 Attended Features (F/G)
– Direct In Lines (DIL)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
Dial Type
DTMF-80 (E1/E&M/ELCOT card): [SP], [NL], [JT], Pulse-10
(E1/E&M/ELCOT card): [G], ISDN (BRI/PRI30 card)
1.
Pulse-10 (10 PPS)
2.
Pulse-20 (20 PPS)
3.
DTMF-80 (80 ms)
4.
DTMF-160 (160 ms)
5.
MFC-R2
6.
ISDN
Specifies the dial type for each trunk line.
This is the dial type regardless of the dial mode of the extension
telephone. The dialling signals from any extension are converted to
the dial type specified by this setting and transmitted to the trunk
line.
<Available selections and the default values per Card Type>
Card Type
BRI/PRI30
ISDN
E&M1/ELCOT
Pulse-10/Pulse-20/
DTMF-80/DTMF-160
E1
Pulse-10/Pulse-20/
DTMF-80/DTMF-160
MFC-R2
)
DTMF-80: [SP], [NL], [JT]
1
*
)
Pulse-10: [G]
*
2
Notes
• In some countries, the E1, the E&M and the ELCOT cards
must not be connected to the Public Switched Network.
None
Selection
Default
ISDN
1
DTMF-80*
/
Pulse-10*
2
1
DTMF-80*
/
2
Pulse-10*
Line
Advertisement
Table of Contents
