Table of Contents
Advertisement
2.2 Tenant
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
(Auto Start Time)
Specifies "Start" time of DAY / NIGHT service on a day of the week basis.
(This setting is valid when "Auto mode" is selected in "DAY / NIGHT Switching Mode"
setting.)
Up to four time frames (Day 1, Night 1, Day 2, Night 2) can be set up on each day of the week.
34
DAY / NIGHT Switching Mode
Manual
1.
Manual
2.
Auto
Specifies the Day / Night switching mode, Manual or Auto.
1.
Manual
The extension allowed by COS (Class of Service)
programming, the Manager or the Operators can switch Day /
Night mode at any time desired by dialling the feature number
for "Night Mode set / cancel."
2.
Auto
The system automatically switches the Day / Night mode each
day at the time programmed in Auto Start Time.
• 2.11.4 Switching the Day / Night Service (U/M)
Inter-tenant Calling (1 - 8)
No check
1.
No check [Disallowed]
2.
Check [Allowed]
Specifies other tenant numbers to which extensions in this tenant
can make a call.
If no tenant numbers are checked in this field, extension users
within this tenant cannot make a call to extensions in other tenants.
Making calls from one tenant to another is not allowed by default.
• 1.3 System Features (F/G)
– Tenant Service
System
Advertisement
Table of Contents
