Table of Contents
Advertisement
1.5 VPS (DPT) Port Assignment
Save the data changes by clicking "Apply" button.
Then set "Port Status" to "INS (In-Service)."
Jack No.1 must be assigned, because the port is used as the channel to control the VPS.
5. Synchronisation of the communication between the KX-TD500 System and the TVP.
The KX-TD500 System begins synchronisation with the VPS when the step 4 is done.
The "Power" LED of the VPS begins flashing at the same time. The LED will turn on after the
synchronisation is completed. It takes for about 30 seconds to 1 minute to be able to use the
VPS system. It depends on the VPS model and the port number you set up.
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
18
TVP No.
1
1- 8
Specifies the device number of a Panasonic Voice Processing
System (VPS), which you are going to programme.
• 1.3 System Features (F/G)
– Integration, VPS
• 1.2 Slot Assignment (P/G)
VPS Card
None
None, XXX : YYY [XXX : Card No. (101-314), YYY : Card Type]
Specifies the physical number of DLC / DHLC card to which VPS
is connected as extensions.
• 1.3 System Features (F/G)
– Integration, VPS
• 1.2 Slot Assignment (P/G)
Configuration
Advertisement
Table of Contents
