Table of Contents
Advertisement
5.9 DISA / TIE User Code
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
196
Code
All: Blank
4-10 digits consisting of 0-9
Specifies the User Codes for DISA / TIE feature.
Notes
• DISA user code is required when the DISA caller attempts to
make an outside call (Trunk Security mode) or to make either
extension or outside call (All Security mode).
• If "TIE-to-CO Security" mode in Section "4.2 Trunk Line"
is set to "Yes," entering TIE user code is required when the
TIE caller attempts to make a CO call.
• If the entire code, for example "1234" is included in another
code, for example "12345," it is not valid.
• When you enable the CO-to-CO transfer feature of DISA
function, if a third party knows the password, there is a risk
that someone else illegally may make a phone call using your
telephone line, and the cost may be charged to your account.
In order to avoid this to happen, we strongly recommend you
to keep the secrecy of the password, and change the
password frequently.
• 1.5 Attended Features (F/G)
– Direct Inward System Access (DISA)
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
COS
All: 96
1-96
Specifies COS (Class of Service) Level for each User Code.
• 2.4 Class of Service (COS) (P/G)
Features
Advertisement
Table of Contents
