Table of Contents
Advertisement
4.2 Trunk Line
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
144
Digits to receive DDI / DID
4 (E1 [DR2] card), 7 (BRI/PRI30 card): [SP], [NL], [JT] 4 (E1
[DR2] card), 8 (BRI/PRI30 card): [G]
0-16 digits
Specifies the number of receiving digits from a DDI / DID trunk.
(Assignable only when "Incoming Type" is set to "DDI" or "DID.")
• 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
[TIE Line] Type
4 wires
1.
2 wires
2.
4 wires
Specifies the voice path type of TIE Lines.
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
[TIE Line] Sensitivity - IN
0 dB
-3 to +6 dB in 3 dB increments
Specifies the voice level for reception.
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
[TIE Line] Sensitivity - OUT
0 dB
-3 to +6 dB in 3 dB increments
Specifies the voice level for transmission.
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
Line
Advertisement
Table of Contents
