Table of Contents
Advertisement
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
System
Automatic Route Selection
No check
1.
Check [Enable]
2.
No check [Disable]
Specifies whether to utilise ARS (Automatic Route Selection) or
not. If set to "No" (No check), "Trunk Access, Idle" is activated
instead of ARS when an extension user dials "9" for making an
outside call.
• 1.6 Originating Features (F/G)
– Automatic Route Selection (ARS)
• 7.1 ARS (Automatic Route Selection) (P/G)
System Speed Dial TRS Level Override
No check: [SP], [NL], [JT], Check: [G]
1.
Check [Enable]
2.
No check [Disable]
Enables or disables "Toll Restriction Override for System Speed
Dial Numbers" feature.
If enabled (Check), all extension users in the tenant can make
System Speed Dialling calls without toll restriction.
• 1.6 Originating Features (F/G)
–Toll Restriction Override for System Speed Dialling
System Speed Dialing Entries Max.
Tenant 1:1000, Tenant 2:1000, Tenant 3-8:0
0-1000 in 20 codes increments
Specifies the maximum number of Speed Dialling codes available
for each tenant.
Note
• Up to 2000 Speed Dialling codes can be shared among tenants
under the restriction of up to 1000 codes per tenant.
• 5.2 System Speed Dialling (P/G)
2.2 Tenant
37
Advertisement
Table of Contents
