Table of Contents
Advertisement
4.2 Trunk Line
3. Select the Trunk Line parameters to copy in "Copy Item" field.
• Only parameters which are available to copy are shown in "Copy Item" field.
This depends on the attribute of the copy source Trunk Line.
• Items marked with " " are copied.
4. Point to the "Select All" button in the "Destination Trunk Line" field and click.
• All displayed Trunk Line Nos. will be highlighted.
• You can also specify one or several Trunk Lines as the copy destination by clicking it
(them) directly.
5. Point to the "Execute" button and click.
• "Are you sure?" is displayed.
6. Point to "Yes (Y)" button and click.
• "Copying" is displayed while the source data is being copied to the destination.
• Parameters of the destination Trunk Lines are immediately effective when copying is
finished.
Parameter
Default
Value Range
Description/Function
Reference
134
Card No.
—
XXX : YYY [XXX : Card No. (101-314), YYY : Card Type]
Specifies the physical number of the trunk card and its type, which
you are going to programme.
•1.2 Slot Assignment (P/G)
Line
Advertisement
Table of Contents
