Table of Contents
Advertisement
3.2 Trunk Group
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
108
Flash Time
80 ms: [SP], [NL], [JT], 300 ms: [G]
1.
None
2.
80 ms
3.
300 ms
4.
600 ms
5.
900 ms
6.
1200 ms
Specifies the length of flash time.
Notes
• In some countries, the ELCOT card must not be connected to
the Public Switched Network.
• When you need finer resolution, assign this to 80 ms and use
"Flash Time" parameter in "1-1 Slot Assignment - Card
Properties (XXX: ELCOT)" screen.
For information on "Card Properties" screen, please refer to
"Card Type" in Section "1.2 Slot Assignment."
• You must use "Flash Time" parameter in "1-1 Slot
Assignment - Card Properties (XXX: ELCOT)" screen when
your Central Office requires a Flash Time not listed here.
• Please refer to "Help file" for detailed information on "Card
Properties (ELCOT)."
None
Max. Dial No. after EFA Signal
0
0-32
Specifies the maximum dialling digits allowed after sending EFA
(External Feature Access) signal.
Note
• If set to "0," the dialling digits can be sent without limit.
• 1.12 Conversation Features (F/G)
– External Feature Access
• 2.8.2 If a Host PBX is Connected (U/M)
Group
Advertisement
Table of Contents
