Table of Contents
Advertisement
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Line
[TIE Line] Sending TIE Caller ID
No
1.
No
2.
Yes
Specifies whether to send or not the TIE Caller ID to the other end.
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
[TIE Line] TIE-to-CO Security Mode
No
1.
No
2.
Yes
Specifies whether to restrict the TIE-to-CO call or not.
If set to "Yes," the TIE caller must enter a valid TIE User Code
before making a CO call via this system.
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
[DDI / DID / TIE] Digits to delete
0
0-16 digits
Specifies the number of digits to be deleted from the number
received from the DDI / DID trunk / other PBX via DID / TIE lines.
• 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
4.2 Trunk Line
145
Advertisement
Table of Contents
