Table of Contents
Advertisement
3. Select the Extension Group parameters to copy in "Copy Item" field.
• Only parameters which are available to copy are shown in "Copy Item" field.
This depends on the Group Type assignment of the copy source Extension Group.
• Items marked with " " are copied.
4. Point to the "Select All" button in the "Destination Extension Group" field and click.
• All displayed Extension Group Nos. will be marked with " ".
• You can also specify one or several Extension Groups as the copy destination by clicking
it (them) directly.
5. Point to the "Execute" button and click.
• "Are you sure?" is displayed.
6. Point to "Yes (Y)" button and click.
• "Copying" is displayed while the source data is being copied to the destination.
• Parameters of the destination Extension Groups are immediately effective when copying
is finished.
Parameter
Default
Value Range
Description/Function
Reference
Group
Group No.
1
1-128
Specifies the Extension Group (1-128) which you are going to
programme.
• 1.3 System Features (F/G)
– Extension Group
3.3 Extension Group
117
Advertisement
Table of Contents
