Table of Contents
Advertisement
2.3 Numbering Plan
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
54
73 Remote FWD Cancel-Once
723
1-4 digits consisting of 0-9,
With this feature number, the Manager or the Operators can reach
an extension that has set Call Forwarding. It is one time ("once")
cancellation, not a permanent cancellation of Call Forwarding on
the destination.
[For Manager, Operator only].
• 3.1.3 Calling the Extension that has set Call Forwarding (Remote
FWD Cancel-Once) (U/M)
74 Trunk Route Control
724
1-4 digits consisting of 0-9,
Specifies the feature number for Trunk Route Control
[For Manager, Operator only].
• 3.2.4 Trunk Route Control (U/M)
75 UCD Monitor Mode
725
1-4 digits consisting of 0-9,
Specifies the feature number for UCD Monitor mode. One
supervisor can be assigned per UCD Group. The supervisor can
monitor the number of calls in the waiting queue.
• 2.11.3 Monitoring the Number of UCD Calls Waiting to be
Answered (UCD Monitor Mode) (U/M)
76 TIE Line Access
77: [SP], [NL], [JT], Blank: [G]
1-4 digits consisting of 0-9,
Specifies the feature number for making a TIE line call.
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
or #
or #
or #
or #
System
Advertisement
Table of Contents
