Snmp Settings; Snmp Parameters - Konica Minolta bizhub C252 Network Scanner Operations

4
4.31

SNMP settings

SNMP settings can be specified.

SNMP parameters

The SNMP parameters are as follows:
Item
SNMP Setting
SNMP v1/v2c(IP)
SNMP v3(IP)
SNMP v1(IPX)
UDP Port Number
[v1/v2c Setting]
[v3 Setting]
The v1/v2c settings that can be specified are described below.
Item
Write Setting
Read Community Name
Write Community Name
4-148
Specifying settings from the control panel
Description
Specify whether to use SNMP.
Select whether to use SNMP v1/v2c (IP).
Select whether to use SNMP v3 (IP).
Select whether to use SNMP v1 (IPX).
Specify the UDP port number. To change the value, press
the [C] (clear) key, and then use the keypad to type in the
value (between 1 and 65535).
Specify when you want to select v1 or v2c. For details on
specifying the setting, refer to "v1/v2c setting" on
page 4-150.
Specify when v3 is selected. For details on specifying the
setting, refer to "v3 setting" on page 4-151.
Description
Specify whether to enable the write setting.
Specify the read community name. The default setting is
"public". Use the keyboard that appears in the touch panel
to type in the read community name.
Specify the write community name. The default setting is
"private". Use the keyboard that appears in the touch panel
to type in the write community name.
bizhub C252