Setting Up Ldap Settings; Ldap Server Registration Parameters - Konica Minolta bizhub C252 Network Scanner Operations

Specifying settings from the control panel
4.18

Setting Up LDAP settings

The LDAP server can be registered and authentication settings can be
specified.

LDAP server registration parameters

The LDAP server registration parameters are as follows:
Setting Up LDAP screen 1/6
Item
LDAP Server Name
Max. Search Results
Timeout
Initial Setting for Search Details
Check Connection
Reset All Settings
bizhub C252
Description
Set the LDAP server name to be registered. Use the key-
board that appears in the touch panel to type in the server
name (up to 32 characters).
Set the maximum number of destinations to display after
searching. To change the value, press the [C] (clear) key,
and then use the keypad to type in the value (between 5
and 1000 destinations).
Set the maximum wait time for the search operation. To
change the value, press the [C] (clear) key, and then use the
keypad to type in the value (between 5 and 300 seconds).
Specify the initial setting of the search conditions when
performing a detailed search. For details on specifying the
setting, refer to "Initial setting for search details" on
page 4-103.
Checks the connection to the LDAP server.
The LDAP server settings can be reset to the default set-
tings that were specified at the factory.
When a reset confirmation message appears, touch [Yes].
4
4-95