Konica Minolta bizhub C252 Network Scanner Operations page 72

3
4
Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to "Specifying the scan
settings" on page 3-48.
5
After specifying the settings, touch [OK].
6
Load the document into the ADF (optional) or position it on the original
glass of the machine.
7
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
3-30
Scanning documents
bizhub C252