Konica Minolta bizhub C252 Network Scanner Operations page 85

Scanning documents
4
Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to "Specifying the scan
settings" on page 3-48.
5
After specifying the settings, touch [OK].
6
Load the document into the ADF (optional) or position it on the original
glass of the machine.
7
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
bizhub C252
3
3-43