Setting The From Address; Specifying The Scan Settings - Konica Minolta bizhub C252 Network Scanner Operations

Before using the scan functions

Setting the from address

To perform Scan to E-Mail, the From address must be registered. The From
address is the address that indicates the sender when data is sent. Normally,
it is recommended that the e-mail address of administrator registration be
used.
If the e-mail address of administrator registration is not specified, the sender
e-mail address must be entered for each Scan to E-mail operation. Note that
Scan to E-Mail is not possible if the From address is not entered.
Note
When the user authentication setting is enabled, the e-mail address that
is specified for each user becomes the From address.

Specifying the scan settings

The following scan settings can be specifying when scanning a document.
These settings are specified from the touch panel of the machine.
Item
File Type
Resolution
Simplex/Duplex
Original Type
Scan Size
Color
Background Removal
Original Setting
Application
!
Detail
For details on the scan settings, refer to "Specifying the scan settings" on
page 3-48.
bizhub C252
Description
Sets the file type to be saved.
Sets the scan resolution.
Selects whether to scan one side of the document or both sides.
Sets the type of image to be scanned.
Sets the size to be scanned.
Sets the color of the scanned document.
Adjusts the density of the background (blank areas) of the document.
Specifies the type and characteristics of the loaded document.
Provides functions for adjusting the print image, for example, for scan-
ning books and for erasing the surrounding area.
2
2-11