Selecting Destinations From The Address Book - Konica Minolta bizhub C252 Network Scanner Operations

3

Selecting destinations from the address book

"Address book" refers to the collection of destination addresses that were
registered in advance. The following procedure describes how to send data
by selecting destinations from the address book. Multiple addresses can be
specified simultaneously from the address book.
For details on registering addresses in the address book, refer to
"Registering abbreviated destinations" on page 4-12.
1
Press the [Scan] key on the control
panel.
The Scan mode screen appears.
2
Touch [Address Book].
The address book is displayed, and registered address names are
displayed by touching the corresponding index button.
Why is [LDAP Search] not displayed on the Address Book tab?
?
% If the [Manual Destination Input] on the Security Details screen
(displayed by touching [Security Setting] on the Administrator
Setting screen) is set to [Restrict], [LDAP Search] does not appear
on the Address Book tab.
To perform LDAP searches, what settings are required?
?
% Administrator settings such as the LDAP sever setting are required.
For details, refer to "Enabling LDAP settings" on page 4-93.
3-14
Scanning documents
bizhub C252