Konica Minolta bizhub C252 Network Scanner Operations page 146

4
6
Touch [Host Address].
– Enter the host address or IP address.
– To enter the host address, check that [Host Name Input] is
selected, and then type in the host address using the keyboard that
appears on the screen.
– To enter the IP address, touch [IP Address Input], and then enter
the value. To change an entered value, touch [ ] or [ ] to move the
cursor to the desired position, and then type in the desired value.
– If [IP Address Input] is touched after entering the host address, the
host address is cleared.
– If the IP address is entered first, then [Host Name Input] is touched,
the IP address that was entered is displayed in the text box.
– If selecting [Host Name Input], check that the DNS settings are
specified correctly before making the selection. For details, refer to
"TCP/IP settings" on page 4-59.
7
Touch [OK].
8
Touch [File Path] and type in the file path using the keyboard that
appears on the screen.
9
Touch [OK].
4-16
Specifying settings from the control panel
bizhub C252