Smb Transmission To Windows 98 Se/Windows Me; Using Programs - Konica Minolta bizhub C252 Network Scanner Operations

3

SMB transmission to Windows 98 SE/Windows Me

When SMB transmitting to Windows 98 SE/Windows Me, the network
settings must meet the conditions described below.
Settings on this machine
- From [Administrator Setting] — [Network Setting] — [SMB Setting],
specify "v1/v2" or "v1" for the NTLM setting.

Using programs

"Program" refers to a set of destination computers and scan settings that are
registered together. The following procedure describes how to send data by
selecting a program that has been registered in advance.
For details on registering programs, refer to "Registering program
destinations" on page 4-27.
1
Press the [Scan] key on the control
panel.
The Scan mode screen appears.
2
Touch [Program].
The selected destinations are listed under "Broadcast Destinations".
Other destination addresses can be added using the address book or
through direct input.
Only the destinations that can be specified are displayed. For example,
fax destinations are not displayed.
3-36
Scanning documents
bizhub C252