Flow Chart Of Setup And Scanning Operations - Konica Minolta bizhub C252 Network Scanner Operations

2
2.5

Flow chart of setup and scanning operations

The sequence from the setup operations required to use the scanning
functions to the scanning operation is shown below.
Specify scan settings in the screen that appears after pressing the [Utility/Counter] key, then
touching [User Setting].
* Specify basic settings such as the format in which scanned data is saved. (Refer to "Setting
the main scan mode screen" on page 4-34 and "Setting the save format of the data to be
scanned" on page 4-40.)
Specify network settings in the screen that appears after pressing the [Utility/Counter] key, then
touching [Administrator Setting].
* Specify settings in order to use the machine on the network. (Refer to "TCP/IP settings" on
page 4-59, "NetWare settings" on page 4-69, "http server settings" on page 4-75, "FTP set-
tings" on page 4-83, "SMB settings" on page 4-86, "AppleTalk settings" on page 4-91, "Ena-
bling LDAP settings" on page 4-93, "Setting Up LDAP settings" on page 4-95, "Search default
setting" on page 4-105, "E-mail TX (SMTP) settings" on page 4-106, "E-mail RX (POP) settings"
on page 4-116, "Device settings" on page 4-121, "Time adjustment settings" on page 4-123,
"Status notification settings" on page 4-127, "Total counter report setting" on page 4-130,
"PING confirmation" on page 4-136, "SLP settings" on page 4-140, "LPD settings" on
page 4-141, "Prefix/Suffix settings" on page 4-142, "Job for the disable proof" on page 4-146,
"SNMP settings" on page 4-148, "Bonjour setting" on page 4-154, "TCP socket setting" on
page 4-156, "OpenAPI settings" on page 4-158, and "External server authentication" on
page 4-163.)
Register destinations in the screen that appears after pressing the [Utility/Counter] key.
* Specify e-mail addresses for e-mail transmissions, register FTP servers, and
specify destination computers. (Refer to "Registering abbreviated destinations" on page 4-12,
"Registering group destinations" on page 4-25, "Registering program destinations" on
page 4-27, and "Specifying e-mail settings" on page 4-30.)
Load the document.
Specify the destination.
Specify the scan settings (refer to page 3-48).
Press the [Start] key in the control panel.
2-14
Before using the scan functions
bizhub C252