Konica Minolta bizhub C252 Network Scanner Operations page 339

Specifying settings Using PageScope Web Connection
When "Group: Scan" is selected
Item
No.
Name
Group
Resolution
File Type
Scan Setting
Subject
Text
Simplex/Duplex
Original Type
Color
Separate Scan
Background Removal
Scan Size
E-Mail Notification
Destination
File Name
Original Direction
Bind
Special Original
Thick Original
Book Scanning
Method
Center Erase
Bind Direction
Erase
bizhub C252
Description
Enter the registration number.
Enter the registration name (up to 24 characters).
Click , and then select a group destination from the list to
display the group number.
Select the resolution.
Select the file format.
Select the unit of the data to be saved.
Specify the subject (Not Specified, 1 to 10). When "Not Spec-
ified" was selected, the default title is used. Click
the contents.
Specify the text (Not Specified, 1 to 10). When "Not Specified"
was selected, the default text is used. Click
contents.
Select "1-Sided", "2-Sided", or "Cover + 2-Sided".
Select the quality of the original such as text or photo.
Select the color mode. The file formats that can be saved may
be limited depending on the color settings. For details, refer to
"File type" on page 3-50.
Select "ON" or "OFF".
Adjust the background darkness.
Select the original size ("Auto", "Standard Size", "Custom
Size").
For "Custom Size", specify the horizontal and vertical scan-
ning sizes.
The upload destination of the file can be notified to the spec-
ified address.
Click to select the notification addresses.
Enter the file name (up to 30 characters).
Select the orientation of the original document.
Select the original binding position.
Specify whether to specify a mixed original document.
Select whether to enable a thick original document.
Select whether to enable book scanning.
If book scanning is enabled, select the scanning method type.
When Book Copy is enabled, specify the width of the center
of the spread document to be erased.
If book scanning is enabled, select the binding direction.
Specify the width of the perimeter of the document to be
erased.
5
to check
to check the
5-37