Snmp Settings] - Konica Minolta bizhub36 Users Manual Network Administration

5
5.7.8

[SNMP Settings]

Configure the settings for SNMP function.
Select [Network] ö [SNMP Settings] ö [SNMP Settings].
Item
[SNMP]
[SNMP v1/v2c(IP)]
[SNMP v3(IP)]
[SNMP v1(IPX)]
[UDP Port]
[SNMP v1/v2c Settings]
[Read Community Name]
[Write]
[Write Community Name]
[SNMP v3 Settings]
5-126
Description
If [Enable] is selected, SNMP is enabled.
If [Enable] is selected, SNMPv1/v2c (IP) is ena-
bled.
If [Enable] is selected, SNMPv3 (IP) is enabled.
If [Enable] is selected, SNMPv1 (IPX) is enabled.
Enter a UDP port number.
The currently used port number cannot be speci-
fied.
Configure the settings for SNMP v1/v2c.
Enter a community name used for reading (up to
15 characters, excluding " ' # \ and space).
If [Enable] is selected, the Write function is ena-
bled.
Enter a community name used for reading and
writing (up to 15 characters, excluding " ' # \ and
space).
Configure the settings for SNMP v3.
[Network] tab 5.7
Control Panel
page 4-11
bizhub 42/36