Appletalk Menu; Standard Usb Menu - Lexmark CS410 Series User Manual

Understanding the printer menus
Use
Choose Network
View Signal Quality
View Security Mode

AppleTalk menu

To access the menu, navigate to either of the following:
• Network/Ports > Standard Network > Standard Network Setup > AppleTalk
•
Network/Ports > Network [x] > Network [x] Setup > AppleTalk
Use
Activate
Yes
No
View Name
View Address
Set Zone
[list of zones available on the network]

Standard USB menu

Use
PCL SmartSwitch
On
Off
PS SmartSwitch
On
Off
To
Select an available network for the printer to use.
View the quality of the wireless connection.
View the encryption method for the wireless network.
To
Enable or disable AppleTalk support.
Note: No is the factory default setting.
Show the assigned AppleTalk name.
Note: The AppleTalk name can be changed only from the Embedded Web
Server.
Show the assigned AppleTalk address.
Note: The AppleTalk address can be changed only from the Embedded Web
Server.
Provide a list of AppleTalk zones available on the network.
Note: The default zone for the network is the factory default setting.
To
Set the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language.
Notes:
•
On is the factory default setting.
•
If PCL SmartSwitch is enabled, then the printer uses PostScript emulation.
• If PCL SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.
Set the printer to automatically switch to PS emulation when a print job received
through a USB port requires it, regardless of the default printer language.
Notes:
•
On is the factory default setting.
•
If PS SmartSwitch is enabled, then the printer uses PostScript emulation.
•
If PS SmartSwitch is disabled, then the printer does not examine incoming data
and it uses the default printer language specified in the Setup menu.
75