Resolution, Density, And Image Quality - Canon iR3530 Manual

Resolution, Density, and Image Quality

To ensure that a received fax is easy to read, set the resolution, density, and image quality to
match the originals you are sending.
2
NOTE
• You can set the resolution, density, and image quality to levels that you use frequently. (See "Changing
the Standard Modes," on p. 5-13.)
• If originals that are dark and difficult to see, or originals that are faint and difficult to see, are scanned
frequently, it is recommended that you set the standard density in advance. (See "Setting the Standard
Density," on p. 5-11.)
• Mode settings that are specified before originals are sent, return to their default settings when scanning
ends or the preset Auto Clear time is reached.
• Although originals sent with the Fine, Superfine, Ultrafine, Photo, or Text/Photo modes have enhanced
clarity, transmission may take longer with these than originals sent in the normal mode.
• The default settings are as follows:
- Resolution: 'Standard'
- Density: 'Standard'
- Image Quality: 'Text'
Resolution:
Standard: Use when the characters are larger than newspaper type.
Fine: Use to send originals in twice the detail of the Standard mode.
Superfine: Use to send originals in four times the detail of the Standard mode. If the receiving fax does
not support this mode, the document is automatically sent in the Fine mode.
Ultrafine: Use to send originals at 16 dots/mm x 15.4 lines/mm (eight times the standard resolution). If
the receiving fax does not support this mode, the original is automatically sent in the Superfine or Fine
mode.
NOTE
• If you are using the Ultrafine mode with the Image Quality mode set to Photo, some originals may
transmit slowly.
• If the receiving fax does not support the Superfine or Ultrafine modes, the originals are sent at the
resolution of the receiving fax.
2-2

Resolution, Density, and Image Quality