Other Situations - Canon iR3530 Manual

Documents cannot be received in memory.
Q
A
Quality of printed originals is uneven.
Q
A

Other Situations

Transmissions are slow.
Q
A
Q
A
Cannot use fax information services.
8
Q
A
Q
A
8-6
When Problems Occur
Is there sufficient available memory?
Erase unwanted documents and documents with errors from memory in order to increase the
amount of available memory. (See "Printing or Erasing Documents," on p. 3-10, and Chapter
2, "Introduction to the Mail Box Functions," in the Copying and Mail Box Guide.)
Is the platen glass of the sender's machine clean?
Make a few copies using your machine. If the copies are not streaked, the problem is in the
sending party's machine. Contact the sender and ask them to send the document again.
Are documents being sent at a high resolution?
It is recommended that you send text only documents at a low resolution.
Is the ECM TX or ECM RX Fax mode setting active?
Check the ECM TX and ECM RX settings. (See "ECM Transmission," on p. 5-31, and "ECM
Reception," on p. 5-36.)
If your fax is connected to a rotary pulse line, is the fax set for tone dialing?
In the case of a rotary pulse line, you must set the fax for tone dialing in order to use fax
information services. (See "Fax Information Services," on p. 3-35.)
Did you receive an instruction from the sender to set the fax to receive?
Press [RX Start]. (See "Fax Information Services," on p. 3-35.)