Things You Must Do Before Using This Machine
1
This section describes the important setting registrations and procedures that must be done
before the machine is used for sending operations.
IMPORTANT
If you attempt to use the machine without registering the necessary information correctly, the machine
may not function properly.
Setting the Line Type
To set the type of telephone line connected to the machine with the optional Super G3 FAX Board
installed, check whether it is a rotary dial (rotary pulse) or a touch-tone type and make the correct
setting. (See "Selecting the Type of Telephone Line," on p. 1-12.)
Registering the Sending Record
The sending record is printed at the top of the recording paper in the receiving machine.
The registered information is printed, as shown below. Depending upon the model of the machine at the
receiving side, this information may appear on the display while communication is taking place.
1-10
Things You Must Do Before Using This Machine
Date
Time
Fax Number
14/05 2004 FRI 15:00
FAX (404)XXX-XXXX
Sender's
Destination
Name
Page Number
Name (TTI)
CANON SALES
Atlanta office
Sender Information
001/001