RX Report
The RX Report enables you to check whether the documents were sent correctly from the
sender's machine and were received successfully by this machine. An RX Report can be
printed automatically after documents are received. You can also set the machine to print an RX
Report only when a reception error occurs.
NOTE
• For an example of an RX Report, see "RX Report," on p. 9-5.
• The default setting is 'Off'.
1
Press
Report].
2
Select [On], [For Error Only], or [Off]
Details of each item are shown below.
[On]:
[For Error Only]: Prints a report only when a reception error occurs.
[Off]:
The selected mode is set.
[Report Settings]
Prints a report each time a document is received.
Does not print a report.
[Fax] under <Custom Settings>
press [OK].
Specifying Report Settings
[RX
7
7-7