Using The Vcs As A Sip Presence Server; Sip Endpoint Registration; Movi V2.0 Clients - TANDBERG Video Communication Server Administrator's Manual

Grey Headline (continued)
SIP

Using the VCS as a SIP Presence Server

The VCS supports the SIP-based SIMPLE protocol. It can act as a:
•
Presence Server
•
Presence User Agent
for any of the SIP domain(s) for which it is authoritative.
For full information on how to use the VCS as a SIP Presence server, see the
Overview and
Introduction Getting started
status
D14049.05
February 2009
SIP overview
Presence
System VCS
configuration configuration
SIP endpoints must register with the VCS (or another SIP Registrar) in order to use the VCS as a
SIP Proxy or SIP Presence
To register your SIP endpoint with a SIP Registrar, enter the IP address or FQDN of the SIP Registrar
into your SIP endpoint.
To enable the VCS to be used as the SIP Registrar for a particular endpoint, the VCS must be
configured with the SIP domain used by the endpoint
Domains).
section.

Movi v2.0 clients

As for any other SIP endpoint, the VCS acts as a SIP Registrar and SIP Proxy for
TANDBERG Movi™ v2.0 clients - no other special support or configuration is required on the VCS.
Zones and Call Bandwidth
neighbors processing control
60
TANDBERG

SIP endpoint registration

Server.
(VCS configuration > Protocols > SIP >
Firewall
Applications
traversal
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Maintenance Appendices