Table of Contents
Advertisement
Grey Headline (continued)
Zones
ENUM zone
ENUM zones allow you to locate endpoints via an ENUM lookup.
You can create one or more ENUM zones based on the ENUM
DNS suffix used and/or by pattern matching of the endpoints'
aliases.
Once you have configured one or more ENUM zones, you can:
•
apply
transforms
to alias search requests directed to that
group of endpoints
•
control the bandwidth used for calls between your local VCS
and each group of ENUM endpoints.
See
Configuring ENUM zones
for information on the configuration
options available.
See
ENUM dialing
for more information on the use of
ENUM zones.
Overview and
Introduction
Getting started
status
D14049.05
February 2009
DNS zones allow you to locate endpoints via a DNS lookup. You
can create one or more DNS zones based on pattern matching of
the endpoints' aliases.
Once you have configured one or more DNS zones, you can:
•
apply
transforms
to alias search requests directed to that
group of endpoints
•
control the bandwidth used for calls between your local VCS
and each group of DNS endpoints.
See
Configuring DNS zones
options available.
System
VCS
Zones and
configuration
configuration
neighbors
DNS zone
for information on the configuration
Call
Bandwidth
processing
control
77
TANDBERG
VIDEO COMMUNICATIONS SERVER
Default Zone
Any incoming calls from endpoints that are not recognized as
belonging to any of the existing configured zones are deemed to
be coming from the Default Zone.
The VCS comes pre-configured with the Default Zone and default
links between it and both the Default Subzone and the Traversal
Subzone.
The purpose of the Default Zone is to allow you to manage
incoming calls from unrecognized endpoints to the VCS. You can
do this by:
•
deleting the default links. This will prevent any incoming calls
from unrecognized endpoints
•
applying pipes to the default links. This will allow you to
control the bandwidth consumed by incoming calls from
unrecognized endpoints.
The Default Zone has no configuration options.
The default links can be reinstated at any time by using
the command:
xCommand DefaultLinksAdd
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
