Table of Contents
Advertisement
Grey Headline (continued)
CPL reference
As the CPL script is evaluated it maintains a list of addresses (H.323 IDs, URLs and E.164 numbers) which will be used as the
destination of the call if a
proxy
node is executed. The
redirected to different destinations.
At the start of script execution the location set is initialized to empty for incoming calls and to the original destination for outgoing
calls.
The following attributes are supported on
reference
for further information).
Clear = "yes" | "no"
url=string
priority=<0.0..1.0> | "random"
regex="<regular expression>" replace="<string>"
This extension to CPL is provided to simplify Call Policy scripts that need to make decisions based on both the source and destination
of the call. A
rule-switch
may contain any number of rules that are tested in sequence; as soon as a match is found the CPL within that
rule element is executed. Each rule must take one of the following forms:
<rule origin="<regular expression>" destination="<regular expression">
<rule authenticated-origin="<regular expression>" destination="<regular expression">
<rule unauthenticated-origin="<regular expression>" destination="<regular expression">
<rule registered-origin="<regular expression>" destination="<regular expression">
<rule originating-user="<regular expression>" destination="<regular expression">
<rule originating-zone="<regular expression>" destination="<regular expression">
The meaning of the various origin selectors is as described in the
Overview and
Introduction
Getting started
status
D14049.05
February 2009
location
location
node allows the location set to be modified so that calls can be
location
nodes. It supports the use of Regular Expressions (see the
Specifies whether to clear the current location set before adding
the new location. The default is to append this location to the
end of the set.
The new location to be added to the location set. The given
string can specify a URL (e.g. user@domain.com), H.323 ID or an
E.164 number.
Specified either as a floating point number in the range
1.0, or random, which assigns a random number within the
1.0
same range.
same priority are searched in parallel.
Specifies the way in which a location matching the regular
expression is to be changed.
rule-switch
field
section.
System
VCS
configuration
configuration
Regular expression
0.0
is the highest priority. Locations with the
Zones and
Call
Bandwidth
neighbors
processing
control
176
TANDBERG
proxy
On executing a
proxy
node the VCS will attempt to forward the
call to the locations specified in the current location set. If
multiple entries are in the location set then this results in a
forked call. If the current location set is empty the call will be
forwarded to its original destination.
reject
If a
reject
node is executed the VCS stops any further script
processing and rejects the current call. The custom reject
status=string
strings
and
supported here.
to
Unsupported CPL elements
The VCS does not currently support some elements that are
described in the CPL RFC. If an attempt is made to upload a
script containing any of the following elements an error message
will be generated and the VCS will continue to use its existing
policy.
The following elements are not currently supported:
•
time-switch
•
string-switch
•
language-switch
•
priority-switch
•
redirect
•
mail
•
log
•
subaction
•
lookup
•
remove-location
Firewall
Applications
traversal
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
reason=string
options are
Maintenance
Appendices
Advertisement
Table of Contents
