Registration History; Registration Details - TANDBERG Video Communication Server Administrator's Manual

Grey Headline (continued)
Status

Registration history

The Registration history page lists all the registrations that are no longer current. It lists the most
recent historical registrations since the last reboot, up to a maximum of 255.
To view the Registration history page:
•
Status > Registration history
The page displays the following information:
Name The H.323 alias or SIP AOR that the device registered.
Clicking on an individual name will take you to the
page for that registration.
E164 For H.323 devices that registered one or more E.164 numbers, the first
will be shown here. For SIP devices this will always be blank because they
cannot register E.164 numbers.
Type Indicates the nature of the registration. This will most commonly be
Endpoint, Gateway, or SIP UA.
Protocol Indicates whether the registration was for a SIP or H.323 device.
Creation Time The date and time at which the registration was accepted.
If an NTP server has not been configured, this will say
End Time The date and time at which the registration was terminated.
Duration The length of time that the registration was in place.
Reason The reason why the registration was terminated.
Filter
To limit the list of registrations, enter one or more characters in the
Only those registrations that contain (in any of the displayed fields) the string you entered will be
shown. To return to the full list of registrations, click Reset.
Overview and
Introduction Getting started
status
D14049.05
February 2009
Registrations Details
Time not set.
Filter field and select Filter.
System VCS Zones and
configuration configuration neighbors
The

Registration details

page shows full information about an individual device's registration. The
exact details and options shown here will depend on the device's protocol, whether the registration
is still current, and whether a Deny List is in use.
To view the Registration details page:
•
Status > Registrations > by device
•
Status > Registrations > by alias , then click on the device's
•
Status > Registration history , then click on the device's
Unregister
Click to de-register the device. Note that the device may automatically re-register after a period of
time, depending on its configuration. To prevent this, you must also
Block
Click to add all the aliases for this registration to the Deny List. (This option is only available if a
Deny List has been activated.)
Unregister and block
Click to de-register the device add all the aliases for this registration to the Deny List, thus
preventing the device from automatically re-registering. (This option is only available if a
has been activated.)
The links available in the Related tasks
Configure the registration Deny List
Click to go to the Registration Deny List
View active calls involving this registration
Click to go to the Calls page, filtered for this particular registration.
View previous calls involving this registration
Click to go to the Call history page, filtered for this particular registration.
Call Bandwidth
processing control
34
TANDBERG VIDEO COMMUNICATIONS SERVER
Registration details
, then click on the device's Name or E164
Alias
Name or E164 number.
use an Allow List or Deny
section may include:
page, where you can add entries to the Deny List.
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
number
List.
Deny List
Appendices