Table of Contents
Advertisement
Grey Headline (continued)
Zones
About zones
A zone is a collection of endpoints, either all
registered to a single system (e.g. TANDBERG
VCS, gatekeeper, or TANDBERG Border
Controller), or of a certain type such as ENUM
or DNS. The use of zones enables you to:
•
use links to determine whether calls can
be made between your local subzones and
these other zones
•
manage the bandwidth of calls between your
local subzones and endpoints in other zones
•
easily search for aliases that are not
registered locally
•
apply transforms to aliases before searching
for them.
Your VCS allows you to configure up to 200
zones of 5 different types. It also has a non-
configurable Default Zone.
See the sections
Adding zones
and
Configuring
zones - common options
for information on
the configuration options available for all zone
types.
Overview and
Introduction
Getting started
status
D14049.05
February 2009
Neighbor zone
A neighbor zone could be a collection of
endpoints registered to another system (e.g.
TANDBERG VCS, gatekeeper, or TANDBERG
Border Controller), or it could be a SIP device
(for example Microsoft Office Communications
Server (OCS) 2007. The other system or SIP
device is referred to as a neighbor. Neighbors
can be part of your own enterprise network,
part of a separate network, or even stand-
alone systems.
You create a neighbor relationship with the
other system by adding it as a neighbor zone
on your local VCS. Once you have added it,
you can:
•
query the neighbor about its endpoints
•
apply transforms to any requests before
they are sent to the neighbor
•
control the bandwidth used for calls
between your local VCS and the neighbor
zone.
See
Configuring neighbor zones
for information
on the specific configuration options available.
Neighbor zone relationships are
one-way. Adding another system to your
VCS as a neighbor does not mean that
your VCS will automatically be a neighbor of
that other system. Your VCS will know about
and be able to query the other system, but the
other system will not know about or be able to
query your VCS. However, inbound calls will be
identified as coming from that neighbor if the
source IP address matches.
System
VCS
Zones and
configuration
configuration
neighbors
Traversal client zone
In order to be able to traverse a firewall, the
VCS must be connected with a traversal server
(for example a TANDBERG VCS Expressway or a
TANDBERG Border Controller).
In this situation your local VCS is a traversal
client, so you create a connection with the
traversal server by creating a traversal client
zone on your local VCS. You then configure the
client zone with details of the corresponding
zone on the traversal server. (The traversal
server must also be configured with details of
the VCS client zone.)
Once you have neighbored with the traversal
server you can:
•
use the neighbor as a traversal server
•
query the traversal server about its
endpoints
•
apply transforms to any queries before they
are sent to the traversal server
•
control the bandwidth used for calls
between your local VCS and the traversal
server.
See
Configuring traversal client zones
information on the specific configuration
options available.
Traversal client-server zone relationships must be two-way. In order for firewall traversal to
work, the traversal server and the traversal client must each be configured with the other's
details. (See
Quick guide to VCS traversal client - server configuration
The client and server will then be able to communicate over the firewall and query each other.
Call
Bandwidth
processing
control
76
TANDBERG
VIDEO COMMUNICATIONS SERVER
Traversal server zone
A VCS Expressway is able to act as a traversal
server, providing firewall traversal on behalf of
traversal clients (for example, VCS Controls or
gatekeepers).
In order to act as a traversal server, the
VCS Expressway must have a special type
of two-way relationship with each traversal
client. To create this connection, you create
a traversal server zone on your local VCS
Expressway and configure it with the details of
the corresponding zone on the traversal client.
(The client must also be configured with details
of the VCS Expressway.)
Once you have neighbored with the traversal
client you can:
•
provide firewall traversal services to the
traversal client
•
query the traversal client about its
endpoints
•
apply transforms to any queries before they
are sent to the traversal client
•
control the bandwidth used for calls
between your local VCS and the traversal
for
client.
See
Configuring traversal server zones
information on the specific configuration
options available.
for more information.)
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
for
Appendices
Advertisement
Table of Contents
