Configuring The Vcs As A Traversal Client; Adding And Configuring A Traversal Client Zone - TANDBERG Video Communication Server Administrator's Manual

Grey Headline (continued)
Configuring the VCS as a traversal client
To enable your VCS to act as a traversal client on behalf of its endpoints and neighbor gatekeepers,
you must create a connection between it and a traversal server (e.g. a TANDBERG VCS Expressway
or Border Controller).
You do this by adding a new traversal client zone on the VCS client and configuring it with the details
of the traversal server.
To add a new traversal client zone:
•
VCS configuration > Zones .
You will be taken to the Zones page.
Select New.
You will be taken to the Create zone page.
• xCommand ZoneAd d
To edit an existing traversal client zone:
•
VCS configuration > Zones .
You will be taken to the Zones page.
Click on the name of the zone you wish to configure.
You will be taken to the Edit zone page.
xConfiguration Zones Zone [1..200
•
xConfiguration Zones Zone [1..200] Traversal Clien
•
For details on the configuration options available for traversal client zones, see the section
Configuring traversal client zones.
You can create more than one traversal client zone if you wish to connect to multiple
traversal servers.
Overview and
Introduction Getting started
status
D14049.05
February 2009
Adding and configuring a traversal client zone
]
t
System VCS
configuration configuration
Zones and Call Bandwidth
neighbors processing control
138
TANDBERG VIDEO COMMUNICATIONS SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices