Table of Contents
Advertisement
Grey Headline (continued)
CPL reference
field
Within the
address-switch
node, the mandatory
Authentication mode: On
Field
SIP
origin
The "From" and "ReplyTo" fields of the
message if it authenticated correctly,
otherwise not-present.
unauthenticated-origin
The "From" and "ReplyTo" fields of the
incoming message.
authenticated-origin
The "From" and "ReplyTo" fields of the
message if it authenticated correctly,
otherwise not-present.
originating-zone
The name of the zone or subzone for the originating leg of the call. If the call originates from a neighbor, traversal server or traversal client zone then this will equate to
the zone name. If it comes from an endpoint within one of the local subzones this will be the name of the subzone. If the call originates from any other locally registered
endpoint this will be "DefaultSubZone". In all other cases this will be "DefaultZone".
originating-user
The username used for authentication.
registered-origin
If the call originates from a registered endpoint this is the list of all aliases it has registered, otherwise not-present.
destination
The destination aliases.
original-destination
The destination aliases.
If the selected field contains multiple aliases then the VCS will attempt to match each address node with all of the aliases before proceeding to the next address node i.e. an address node matches if it
matches any alias.
Overview and
Introduction
Getting started
status
D14049.05
February 2009
field
parameter specifies which address is to be considered. The supported attributes and their interpretation are as follows:
H.323
The source aliases from the original
LRQ or ARQ that started the call if
it authenticated correctly otherwise
not-present. Since SETUP messages
are not authenticated if we receive a
setup without a preceding RAS message
the origin will always be not-present.
The source aliases from the original LRQ
or ARQ that started the call. If a SETUP
is received without a preceding RAS
message then the origin is taken from the
SETUP.
The source aliases from the original
LRQ or ARQ that started the call if
it authenticated correctly otherwise
empty. Since SETUP messages are not
authenticated if we receive a setup
without a preceding RAS message the
origin will always be not-present.
System
VCS
Zones and
configuration
configuration
neighbors
address-switch
Authentication mode: Off
SIP
The "From" and "ReplyTo" fields of the
incoming message.
The "From" and "ReplyTo" fields of the
incoming message.
not-present
not-present
Call
Bandwidth
processing
control
174
TANDBERG
VIDEO COMMUNICATIONS SERVER
H.323
The source aliases from the original LRQ
or ARQ that started the call. If a SETUP
is received without a preceding RAS
message then the origin is taken from
the SETUP.
The source aliases from the original LRQ
or ARQ that started the call. If a SETUP
is received without a preceding RAS
message then the origin is taken from
the SETUP.
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices
Advertisement
Table of Contents
