Table of Contents
Advertisement
Site Settings
Status.
Displays the status of Content Server's
registration with the SIP registrar.
Display name.
Enter the Content Server's SIP
display name.
Server Discovery
is Manual. The IP of the
Server must be entered below.
Server Type.
Select the type of SIP registrar.
The default setting is Auto, which supports
registering to standard SIP servers like
OpenSIPS.
User name.
Enter the user name to
authenticate toward the SIP server.
Password.
Enter the password to authenticate
toward the SIP server.
Password confirm.
Re-enter the password.
Table of
Introduction
Installation
Contents
D13898.08
MAY 2009
SIP Settings
TCS
Backing up and
Quick Setup
Administration
Restoring
Administrator
Conference
Settings
Setup
Conferences
42
TANDBERG
ADMINISTRATOR GUIDE
Status:
Displays the status of Content Server
registration with the SIP registrar.
Registrations:
Displays all Aliases that are
registered to the SIP registrar.
The clickable link
View all SIP registrations
to the
SIP Alias Registration
SIP enabled.
Select to enable registration with
a SIP registrar.
SIP Address (URI).
Other systems can call
the Content Server using the SIP Address
or URI (Uniform Resource Identifier) if the
Content Server is registered to a SIP registrar.
The recording alias specified in the Default
Recording Aliases will be used for the call.
Server Address.
Enter the IP address or a fully
qualified domain name of the SIP registrar.
Transport.
Choose the transport protocol
for SIP. The default transport method is TCP
(Transmission Control Protocol). UDP (User
Datagram Protocol) can also be used.
Changes to any fields in the
section will not take effect on the
Content Server until all its calls have
ended.
View
Appendices
CONTENT SERVER
link
page.
SIP Settings
Advertisement
Table of Contents
